[Tenchi Ryu]

Please don't shoot the messenger 

ROUGH, I repeat....ROUGH!

Omatsuri Zenjitsu no Yoru Omake Ban (ENG) NSFW
http://www.fileserve.com/file/XV8Vdu9

[JibrilMudo]

Please don't shoot the messenger 

ROUGH, I repeat....ROUGH!

Omatsuri Zenjitsu no Yoru Omake Ban (ENG) NSFW
http://www.fileserve.com/file/XV8Vdu9

Ooh thanks, I don't mind because I like it rough!

[will1384]

Please don't shoot the messenger 

ROUGH, I repeat....ROUGH!

Omatsuri Zenjitsu no Yoru Omake Ban (ENG) NSFW
http://www.fileserve.com/file/XV8Vdu9

Wow thanks 

[Tenchi Ryu]

Here is a re-clean by ShadesofBlue....I like his font better, It has a better feel to the original japanese text
http://www.megaupload.com/?d=ZN5506WW

[shades of blue]

The after thoughts section was very interesting, and goes along with my long running belief that Z would turn out to be Tenchi's little brother.

"I had considered going all out and including a scenario... ...where Z's mother... ...is in love with a certain engineer, but for various reasons I opted not to."

That 'certain engineer' is probably Nobuyuki... If so, we now know Reia's back story and that she's not the same Reia from ISM. Also, why Tokimi appeared at the wedding and what the big 'secret' was.


toying with a version 2 of those edits, minor changes to the wording, for spacing and consistency.

[JibrilMudo]

Also, why Tokimi appeared at the wedding and what the big 'secret' was.

I always assumed Tokimi went to the wedding as a way to say "I'm family now", joining herself to Tenchi's harem.

[shades of blue]

Also, why Tokimi appeared at the wedding and what the big 'secret' was.

I always assumed Tokimi went to the wedding as a way to say "I'm family now", joining herself to Tenchi's harem.

Not me, the pregnancy came far too soon after the events of OVA3. [Remember, she's prego in GXP.]

Serving up version two of my Omake Ban edits. [Cover is untouched v1, just figured I'd post it too.] Complete archive will be available on my mediafire page once Tenchi Ryu confirms it to be the final version.

EDIT: complete archive, containing unaltered and English pages is now uploaded to my mediafire page. [No sense in trashing the originals and the changes are so small that releasing them are two separate archives seems... silly.]

[Tenchi Ryu]

Yes that looks good to me. Adding to my archives now.

At least its finally set in stone the nobody has left the harem, for some reason, quite a few people thought mihoshi was no longer there, why they would think that I don't know. It also a very nice reveal that This is in fact only a year before the complete merge of sasami and Tsunami. That means by the time of ISM, tsunami is the one cooking dinners and getting nightly pleasure by tenchi-sama (let the sasami-Tsunami fans REJOICE)

The Zs mother part is also very interesting, but it really makes you question how the original storyline for ISM was written back in the early 90s. It also kinda sucks to find out there should have been more episodes to OVA 3. But maybe cause some of his ideas would conflict with what was established in GXP.

And to Jibril, notice how he was talking about how GXP 7 is suppose to have a "serious" storyline. That leaves me very interesting in what is to be expected in this new novel to come out soon.

For translation news, like I was telling Shades earlier.....ANB and others agree that the next possible translation should be the New 10.12 kajishima onsen that was recently released. Its probably the most urgent material that needs to be translated because of the strong possibility of letting us see what kajishima is planning to do this year.  Don't expect this to be released in days though, this one will take time, as the translator has a busy life, and is doing this on his free time....for free by the way.

[shades of blue]

Check it out, Kenshi's brows match Z's mother. [I've got way too much time on my hands...LMAO]

[Harls]

And to Jibril, notice how he was talking about how GXP 7 is suppose to have a "serious" storyline. That leaves me very interesting in what is to be expected in this new novel to come out soon.

No, judging by the time this was written (2005), I believe he's referring to OVA 3, episode 7.

[shades of blue]

And to Jibril, notice how he was talking about how GXP 7 is suppose to have a "serious" storyline. That leaves me very interesting in what is to be expected in this new novel to come out soon.

No, judging by the time this was written (2005), I believe he's referring to OVA 3, episode 7.

It's definitely not about OVA3. What it's probably referring to is chapter 7 of GXP novel #2, which came out August 20th 2005.

[will1384]

I just put an order in for another AIC art book, Pretty Samy art book, but
it may take two or three weeks to get here 

On a second note I have been working on building a CNC router,
and that took most of this month, I was able to finish it, but now
I need to learn the software that controls it, - I am going to use it
to make make parts for another book scanner, art work, and other
projects 

I will try to get back to book scanning soon, likely in a week or two.

[shades of blue]

A homemade CNC machine? wow, that's even more impressive than that scanner you built. Don't forget to show us some pictures of the finished product.

[Kiyoka]

Would anyone like scans of the mihoshi/Kiyone book? I say scans but I'll be taking pics, there's no way I am ruining the spine.

[will1384]

Would anyone like scans of the mihoshi/Kiyone book? I say scans but I'll be taking pics, there's no way I am ruining the spine.

If that's the one I am thinking about, there are 4 of them,

Tenchi Muyo! Character book - Ayeka
Tenchi Muyo! Character book - Mihoshi
Tenchi Muyo! Character book - Ryoko
Tenchi Muyo! Character book - Sasami

I have the Ryoko book, and I thought I had the Sasami one, but can't find it,
I am planning on getting the ones I am missing when I have the money and
can find them LOL

If you have a flatbed scanner you can work the spine a little and flatten the book out
and just scan it, -- on some older books that can make the glue crack and pages fall
out, it just depends on the book, some dont mind getting flattened out, and some fall
apart.

Over at instructables.com they have a few ideas for cheap book scanners
and copy stands, here are a few.

Bargain-Price Book Scanner From A Cardboard Box.
http://www.instructables.com/id/Bargain-Price-Book-Scanner-From-A-Cardboard-Box/

New & Improved Portable, Paperless, Digital Copy Machine
http://www.instructables.com/id/New-Improved-Portable-Paperless-Digital-Copy-M/

Copy Stand - Cheap and easy to build
http://www.instructables.com/id/Copy-Stand-Cheap-and-easy-to-build/

A homemade CNC machine? wow, that's even more impressive than that scanner you built. Don't forget to show us some pictures of the finished product.

I got a good deal on a DIY kit, it was just parts when I got it, its taken most of this month
to clear out a space in my workshop, setup a PC for CNC, assemble the CNC router, and
basic wiring / electronics.

I have a Picasa album of it over at

http://picasaweb.google.com/will1384/CNC?feat=directlink

I am still learning the software - have yet to do much of anything with it